LCD Monitor
LCD(TM133XG07A) and RJ45,RJ11 Connector and NB Mather(KRIS),NB Mather (KRIMO2)  Connection Table
LCDpin
(JAE 20pin 
Connector)		 LCD signal RJ45,RJ11 
Connector		 Mather pin 
(40pin 
Connector)		 Notice
1,2 Power Supply 3.3V RJ11_2pin  22-24iLCDVCC) (1),(2)
3,4 Ground RJ11_1pin  27-34iGND) (1)
5 LVDS Data of 0 M(-) RJ45_1pin 20 Twist Pair Data 0M and 0P (3) 
6 LVDS Data of 0 P(+) RJ45_2pin 19  
7 Ground      
8 LVDS Data of 1 M(-) RJ45_3pin 18 Twist Pair Data 1M and 1P (3) 
9 LVDS Data of 1 P(+) RJ45_6pin 17  
10 Ground      
11 LVDS Data of 2 M(-) RJ45_4pin 16 Twist Pair Data 2M and 2P (3) 
12 LVDS Data of 2 P(+) RJ45_5pin 15  
13 Ground      
14 LVDS Clock of M(-) RJ45_7pin 14 Twist Pair  Clock M and P  (3) 
15 LVDS Clock of P(+) RJ45_8pin 13  
16,19,20 Ground      
17,18 N.C.      
Notice(1) Attention Line Drop. (LCD Power Sunpply MIN.3.0V at Ground)
             Recommend (AWG#20 or #22) at 3m length.
Notice(2) LCDVCC  becomes disable by Mather power save.
Notice(3) All 4 pairs of LVDS signals be connected by the same length  between LCD and Mather board.
 
About setup of 40pin connector for SingleLVDS XGA LCD
Mather pin 
(40pin Connector)		 NB Mather(KRIS) 
Connection		 Mather (KRIMO2)
Connection
35   Connect to GND (2) 
36    
37 Connect to GND  (1)   
38 Connect to GND  (1)  
39    
40    
Notice(1) If not connect,Mather LVDS output is SXGA+? (unidentified).
Notice(2) If not connect,Mather LCDVCC is disable.
 
 
Inverter(Apple Shell Style iBOOK ) and RJ11 Connector and NB(KRIS) Mather Connection Table
Inverter
(6pin)		 Inverter
Signal		 RJ11 Connector NB(KRIS) Mather pin
(40pin Connector)		 Notice
1 VCC RJ11_4pin 1-3 1-3 pin Mather Suppley Voltage
2 Ground RJ11_1pin 27-34iGND)  
3,4 Enable  RJ11_3pin 40 40 pin signal becomes disable by Mather power save.
NB(KRIMO2) mather, it is unidentified.
5,6 N.C.